Bidh sinn tric a’ cumail ris a’ phrionnsapal bhunasach “Càileachd 1d, Àrd-urram”. Tha sinn làn dhealasach a thaobh toraidhean is fuasglaidhean sàr-mhath aig prìsean farpaiseach a thoirt do ar luchd-ceannach, lìbhrigeadh sgiobalta agus solaraiche sgileil airson Dealbhadh Mòr-chòrdte airson Briseadh Cuairteachaidh Obrachaidh Cus Luchd Teirmeach MCCB. Tha sinn a’ cur fàilte chridheil air luchd-ceannach bho air feadh an t-saoghail airson cha mhòr seòrsa sam bith de cho-obrachadh leinn gus buannachd dha chèile a dhèanamh san fhad-ùine. Tha sinn gar dìcheall fhèin a thoirt seachad gus an t-seirbheis air leth a thabhann do luchd-ceannach.
Bidh sinn tric a’ cumail ris a’ phrionnsapal bhunasach “Càileachd an toiseach, cliù àrd-inbhe”. Tha sinn làn dhealasach a thaobh toraidhean is fuasglaidhean sàr-mhath aig prìsean farpaiseach, lìbhrigeadh sgiobalta agus solaraiche sgileil a thoirt do ar luchd-ceannach.Briseadh-cuairteachaidh atharrachail teirmeach Sìona agus atharrachail teirmeach agus magnetach atharrachailBidh sinn an-còmhnaidh a’ cumail a-mach gu bheil “Càileachd an toiseach, Teicneòlas mar bhunait, Onarachd agus Nuadh-chruthachadh” mar phrìomh phrionnsabal riaghlaidh. Tha sinn air a bhith comasach air nithean ùra a leasachadh gu leantainneach gu ìre nas àirde gus coinneachadh ri feumalachdan eadar-dhealaichte luchd-ceannach.
Tha briseadair cuairteachaidh cùis mhúnlaichte sreath RDM5 air a chur an sàs ann an cuairt AC 50HZ, bholtaids inslithe 1000V, bholtaids obrach reataichte suas gu 690V, sruth reataichte suas gu 800A, a bhios a’ sgaoileadh a’ chumhachd agus a’ dìon a’ chuairt agus an stòr cumhachd an aghaidh cus cuideim, cuairt ghoirid agus milleadh fo-bholtachd. Gu sònraichte, nuair a tha an sruth nas ìsle na 630A, faodaidh e cuideachd am motair a dhìon. Mar as trice is ann ainneamh a bhios am briseadair ag atharrachadh agus a’ tòiseachadh a’ motair. Faodar an toradh a chuir a-steach gu dìreach agus gu còmhnard.
1. Dealbhadh Sgaoilidh Modúlach Pannal
2. Dealbhadh goireasan bogsaichte, stàladh furasta
3. Comas Brisidh Deireannach
4. Meud teann
5. Tha an sruth briseadh geàrr-chuairtichte Ics 10ka nas àirde na comas briseadh as àirde an toraidh thraidiseanta RDM1.
6. Beatha seirbheis mhaireannach RDM5 Bidh sinn gu tric a’ cumail ris a’ phrionnsapal bhunasach “Càileachd 1d, Àrd-inbhe”. Tha sinn làn dhealasach a thaobh a bhith a’ toirt do ar luchd-ceannach toraidhean is fuasglaidhean sàr-mhath aig prìsean farpaiseach, lìbhrigeadh sgiobalta agus solaraiche sgileil airson Dealbhadh Mòr-chòrdte airson Briseadh Cuairteachaidh Obrachaidh Cus Luchd Teirmeach MCCB, Tha sinn a’ cur fàilte chridheil air luchd-ceannach bho air feadh an t-saoghail airson cha mhòr seòrsa sam bith de cho-obrachadh leinn gus buannachd dha chèile a dhèanamh san fhad-ùine. Tha sinn gar dìcheall fhèin a’ tabhann an t-seirbheis air leth do luchd-ceannach.
Dealbhadh mòr-chòrdte airsonBriseadh-cuairteachaidh atharrachail teirmeach Sìona agus atharrachail teirmeach agus magnetach atharrachailBidh sinn an-còmhnaidh a’ cumail a-mach gu bheil “Càileachd an toiseach, Teicneòlas mar bhunait, Onarachd agus Nuadh-chruthachadh” mar phrìomh phrionnsabal riaghlaidh. Tha sinn air a bhith comasach air nithean ùra a leasachadh gu leantainneach gu ìre nas àirde gus coinneachadh ri feumalachdan eadar-dhealaichte luchd-ceannach.
| Sruth ìreichte ìre frèam l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Sruth ìreichte ln (A) | 10, 16, 20, 25, 32, 40, 50, 63 | 10, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 | 63, 80, 100, 125, 160 | 100, 125, 160, 180, 200, 225, 250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pòla (P) | 2, 3, 4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Tricead rangaichte (Hz) | 50 | ||||||||||||||||||||||||
| Bholtaids inslithe reataichteUi (V) | AC1000 | ||||||||||||||||||||||||
| Bholtaids seasamh-cuideachaidh reataichte (V) | 12000 | ||||||||||||||||||||||||
| Bholtaids obrach reataichte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Astar boghaidh (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Comas briseadh geàrr-chuairt | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Crìoch Reataichte/Comas briseadh Reataichte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Crìoch Reataichte/Comas briseadh Reataichte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Cleachd roinn | A | ||||||||||||||||||||||||
| A rèir inbhean | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Freagarrach airson teòthachd àrainneachd obrach | -5℃+40℃ | ||||||||||||||||||||||||
| Beatha dealain (uaireannan) | 8000 | 7500 | |||||||||||||||||||||||
| Beatha mheacanaigeach (uaireannan) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Sgaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Sgaoileadh fo-bholtaids | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Conaltradh rabhaidh | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Conaltradh taice | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pòla 3 pòla
4 pòlaichean Taobh
| Modail toraidh | Pòla | Uèirleadh pannal aghaidh | Meud an stàlaidh | Suidheachadh a' phutan | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/Uair | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/Uair | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/U RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/U | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Còd meud | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Meud fosglaidh pannal stàlaidh uèirichean pannal cùil sreath RDM5
3 Pòlaichean 4 Pòlaichean
Coltas uèirleadh pannal cùil sreath RDM5 agus tomhasan stàlaidh
RDM5- 125M/U 160,250 RDM5-400,630,800
Coltas uèirleadh cùil RDM5-125~800 agus meud fosglaidh a’ phlàta sreap
| Modail toraidh | Còd meud | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Meudan pannal aghaidh plug-in sreath RDM5
Suidheachadh còmhnard
Meudan briseadair cuairteachaidh pannal aghaidh plug-in RDM5-125~800
| Modail toraidh | Còd meud | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L, M, H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Meud an toll ann am plàta sreap uèirleadh aghaidh a’ phluga (is e X-XY-Y meadhan a’ bhriseadair cuairte)
Stàladh beam Suidheachadh còmhnard
Meud fosglaidh plàta sreap uèirleadh aghaidh plug-in RDM5-125~800
| Modail toraidh | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| pòla | 3 | 3 | 3 | 3 | 3 | |||||||||
| Meud fosglaidh a’ phlàta sreap (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Tomhasan cùil pannal plug-in sreath RDM5 agus tomhasan fosglaidh pannal sreap
Meudan briseadair cuairteachaidh pannal cùil plug-in RDM5-125~800
| Modail toraidh | Còd meud | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Meud toll pannal stàlaidh uèirleadh cùil plug-in (is e X-XY-Y meadhan a’ bhriseadair cuairte)
Meud fosglaidh pannal stàlaidh uèirichean cùil plug-in RDM5-125~800
| Modail toraidh | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| pòla | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Meud fosglaidh a’ phlàta sreap (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
